Make sure the drawing in which you want to apply 2d Command should be closed in shape. Step 3: Now, for the 2d Command command, type H from the keyboard, then press enter button from the keyboard for having the 2d Command command. Step 4: Or you can go on the Draw menu of the Home tab and click on this 2d Command command icon for having it.
Step 5: Once you have the 2d Command command, then the 2d Command Creation tab will be open like this. We have different parameters of the 2d Command command here.
Step 6: From the Pattern tab, you can choose the type of 2d Commands, such as if you want to brick-like pattern on a particular drawing of civil engineering, then you can choose this Angle pattern.
Step 7: Now, you can apply 2d Command by two methods. Step 8: Then, it will ask you to select a point inside the boundaries of part of the drawing in which you want to apply 2d Command. Step The second method is to Select the Boundary object so click on its icon. Step Then it will ask you to select the object boundary on which you want to apply 2d Command, so when you select the boundary, it will cover the whole block like this. So, according to your requirement, you can go with any one of the methods of applying 2d Command.
Step Now, if you want to show the cross-section of any part in drawing, then you can choose this type of 2d Command pattern. Step Now, I want to show the cross-section of this circle like this, so I will apply 2d Command on it by the same method as I did in the previous.
Step Now, let us discuss other options of this 2d Command command. For this, I will again apply 2d Command on this drawing, and you can see there is some option at the end of the working screen in the parameter box of this command. So click on the Settings option from the list. Step Once you make a click, a 2d Command settings box will be open. You can make a change in your applied 2d Command according to you.
You can change the pattern of 2d Command from this list also. Step If you want to apply 2d Command of a specific color, then choose the color from this list and click on the Preview button of this box.
Then you should be good to go! Oct 9, A screw thread, often shortened to thread, is a helical structure used to convert between rotational and linear movement or force. A screw thread is a ridge wrapped around a cylinder or cone in the form of a helix, with the former being called a straight thread and the latter called a tapered thread. In the PropertyManager, specify a standard if you want type and size as well. How to Draw a Nut First draw a normal oval. Now, using two straight, short lines draw the side surfaces and draw a bottom with a curved line.
Now draw a circular hole in the center of the nut and the edges using straight lines. Erase all unnecessary lines, draw out the outlines of the nut and the thread inside the hole. Definition of drawbolt 1 : coupler sense 1a.
Start AutoCAD. Make a Polygon using polygon command with 6 side center at 0,0 circumscribed in a circle of radius 36mm. Make a circle at origin of radius 20mm. Use region command and select all and then press enter. Use the Intersection tool to derive the intersection between the two solids. This cuts a chamfer on the nut. Figure 14 Repeat the same procedure on the other side. Figure 15 Add a 0. Figure 16 Turn the Internal Threading Tool layer on. Create a new Helix path for the internal threading tool.
Figure 17 Sweep the cut tool and subtract as was done with the external thread. Figure 18 Figure 19 That completes the internal and external cut threads. Remember you might want to cut clearance if you are going to rapid prototype your cut thread parts. Keep in mind that RP processes are not as accurate as machined processes and may require a more liberal clearance.
0コメント